Individual Design report -Technology Integration Coursework

Individual Design report -Technology Integration - Coursework Example The artefact itself will be the size of an average human torso, which will be placed on a square platform and will be encased in a glass box of about six feet height and three feet width on all sides. Glass panels on all sides will be electric blue in colour and embedded with LED lightning streaks panelled on the sides and back, which can play different patterns of lightning on predetermined intervals or through sensor detection as people pass by and on-off switch will be controlled both through pre-programmed computer system within the platform of the artefact. The front side will be plain glass with no embellishments to afford a clear view. The female form will be rendered in very light cream colour to allow better transparency. The artefact will be facing the sidewalk or road so that it receives maximum view. The female has a cigarette packet in her left hand and a lighted cigarette between the fingers of her right hand. Every time she brings the cigarette to her mouth and takes a drag, the tip will glow and her lungs will be displayed. As she takes out the cigarette from her mouth and brings the hand down, her lungs will darken and the light will fade out. An audio will play, â€Å"Puffing out Your Lungs?† and simultaneously the lightning streaks will illuminate, playing different patterns on all sides and, at the same time, the words of the audio will appear on the front panel. Once the entire series of action is completed, it will repeat only when a passerby approaches within the radius of five metres, or again at a predetermined interval as per the computer programme. When placed on busy roadsides and other areas in future, the artefact will cater for appropriate changes depending on the locations where these will be placed and will also introduce sensors and other appropriate systems for vehicles passing by. During the intervals between the actions, the system will play some mild music. Evaluation: The main objective of this project is to attract the attention of the public to the health hazards of behaviours such as smoking. The glasswork of the design and the lighting effects are intended for attracting and engaging the public who are the audience for this campaign. LED embedding in glass panels is a rather recently developed technology that has immense potential in attracting attention. The technology involves the use of a â€Å"sustainable active glass system,† which can diffuse an array of vibrant colour lights emanating from LEDs and can be operated through electronic programming (LED in Glass 2011:2). The following diagram will illustrate the system: (LED in Glass 2011) This system allows the emission of light from several multicoloured LED strips through glass edges and the light gets â€Å"refracted out of the front and back† (2). The same technology will be used for the burning tip of the cigarette, which will be triggered on the movement of the arm. This technology offers immense possibility of alig ning a wide range of design, colour and light features into glass and can be highly appealing to the audience, especially during night times. The lightning streaks will be in deep orange colour that will enable visibility from distance and also catch the immediate attraction of public. The system will operate through electronic programming of a suitable type that is user friendly and cost effective. In addition, technologies such as cloud computing will be used for enabling easy access and operational efficiency of the

Green and Gracious Essay Example | Topics and Well Written Essays - 4000 words

Green and Gracious - Essay Example greases from machinery and equipment, used or leftover paints containing heavy metals or organic solvents, used or spent lead-acid batteries, used explosive tool cartridge. The responsible person (engineer or supervisor) shall determine the volume of concrete, in addition to determining the last balance area, to be used before placing an order. A material wastage control form shall be attached while ordering concrete. The responsible person (engineer or supervisor) shall ensure that the quantity of rebar delivered is in conformance with the order. Sub-contractors shall use cut and bent rebar on site as far as practicable. Shelter must be erected at site for safe storage of pre-packed cement by prevention of direct contact with sunlight or rain water. The responsible person (supervisor) shall be responsible for monitoring the quantity ordered and delivered on site. The responsible person (ECO or SO) shall record waste disposal, and maintain and update the waste register at each project. Wastes such as steel, concrete, or wood shall be recycled for minimization of waste disposal. The responsible person (ECO, SO, HS, SS) shall inform the PM or PIC if any irregularities such as mixing of wastes are discovered. The responsible person (PM or PIC) shall initiate EHS non-conformance, corrective and preventive action, and other necessary action for prevention of recurrence when there is failure in reduction of materials. The responsible person (QS) shall review and update the material quantity schedule based on project progress, and forward the revised material quantity schedule to the concerned personnel for monitoring. Metal formwork that can be re-used for several projects shall be used. Formwork shall be supported by aluminium â€Å"I† beams and steel rectangular hollow sections instead of timber sections. Precast pre-tensioned slab or hollow core slab shall be used as an integral slab system that also acts as a formwork system. The responsible person (PM) shall